Overview

PU40300 is a single component sprayable moisture-curing urethane adhesive. It has been developed for fast spray applications in the foam and textile bonding industry. The adhesive gives excellent bonds to PU foam, scrim, and fabrics.
Developed primarily for fabric and foam insulation (e.g., domestic scouring pads and building insulation materials), with good wash resistance and low viscosity to give a consistent spray pattern.
Its ease of spreading, high solids content, and one-way stick characteristics ensure fast, low-cost coverage. The PU40300 series is available in a wide range of working times and can be customised to individual customer requirements.

 

Available in:
200L Drum

Applications

  • Fabric lamination
  • Foam lamination
  • Textile lamination
  • Domestic scouring pads
  • Building insulation
  • Flexible Foams
  • Automotive trim

How to use

  • Substrate Preparation

    Materials to be bonded must be free from surface contamination, dust, grease, etc.

  • Application

    The recommended application is via airless spray although conventional air spray systems may be used, providing that conditions are carefully monitored.

  • Pressing

    Sufficient even pressure must be applied to keep the components in intimate contact until tack has built up. The pressure required will depend upon the nature of the substrates.

  • Cleaning

    At the end of the application run, it is essential that glue lines and spray heads are thoroughly cleaned. This is best achieved by flushing the lines and heads with solvent.

Downloads

Technical Data Sheet

Safety Data Sheet

FAQs

Is PU40300 available in a variety of working times?

Yes, a wide range of working times are available within the range, and this can be customised to fit unique customer requirements.

Is an extraction system recommended when using PU40300?

Yes, the solvent system contained in this adhesive is predominantly non-flammable and of low toxicity but should be used in well ventilated surroundings. Ensure effective extraction to maintain the working environment below the OEL.

Find the quality product you need

Product Finder