Overview
SabreGrip S50 is a high solids contact adhesive that effectively bonds a vast range of substrates while maintaining compliance with stringent California VOC requirements (SCAQMD Rule 1168). SabreGrip S50 exhibits excellent adhesion to fabrics and is designed to minimize bleed-through.
Available in:
22L Canister
Applications
- Whiteboards
- Screens
- Fabrics
- Foams
- Polystyrene
- Domestic furniture
- Office furniture
- Mattresses
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
How to Use
- Spraying the Adhesive:
Hold spray gun 10-20cm from the surfaces and apply an even coat to cover 80 – 100% of the entire surface to be bonded, slightly overlapping with each pass.
- Tack Time:
Allow to dry to tack for 1 – 2 minutes. For porous surfaces and crucial areas, it is recommended to apply a second coat after the first has become tacky.
- Bonding:
Place the coated surfaces together and apply firm, uniform pressure to the entire bonding surface (a roller is recommended).
- Cleaning:
To remove excess adhesive use Sabre CC Citrus Cleaner.
For full instructions on using your canister please view our SabreGrip Spraying Manual
For full instructions on how dispose of your canister, view our SabreGrip Canister Disposal Guide
Downloads
FAQs
How much coverage will I get with SabreGrip S50?
Estimated coverage is up to 200m² (single sided) per 22L canister. Coverage is dependent on surface absorbency and adhesive coat weight.
How do I fix the gun if it is blocked?
Instructions for fixing blocked guns can be found on our SabreGrip Gun Maintenance Guide
How do I dispose of my canister?
Instructions for disposing of empty canisters can be found on our SabreGrip Canister Disposal Guide
Find the quality product you need
Product Finder
