Overview
SabreSeal MS Facade Sealant, one of the bestselling products of our MS Sealant Collection, is a versatile and high-performance Silyl Modified Polymer (MS) sealant that can be used for sealing joints in various materials, including concrete, metal, glass, aluminium, timber, and many plastics. Specifically designed for both indoor and outdoor applications, SabreSeal MS Facade Sealant is an excellent choice for joint sealing, facade cladding, joinery, tilt panel, and lap joints on flashing and roofing materials. In addition, this sealant can be painted with most water-based paints, making it an ideal choice for a range of applications.
SabreSeal MS Facade Sealant also exhibits exceptional UV stability and has been independently tested by BRANZ for durability in New Zealand’s harsh environmental climate, making it a reliable concrete joint sealant that can withstand the test of time.
Available in:
300ml Cartridge (White/Grey)
600ml Foilpack (White/Grey/Black)
Applications
- Construction joints
- Concrete precast panels
- ACM Cladding and facades
- Aluminium joinery
- Exterior cladding
- Fibre cement sheeting
- HVAC and sheetmetal
- Coolstores
- Roofing
See all applications in our Technical Data Sheet
UV resistant joint sealing of ACM façade cladding panels
See all applications in our Technical Data Sheet
How to Use
- Method
Manual or pneumatic caulking gun.
- Application Temperature
+5°C until +35°C
- Substrate Preparation
Ensure substrates are clean, dry and free of dust and grease.
- Priming
Critical applications such as multi-story buildings or exposed areas should be primed for optimal adhesion and durability. Prime porous concrete, AAC, and timber with Sabre Primer PX – leave to flash off for 30 min. Powder-coats & metals will require a light abrasion then be wiped with Sabre Surface Activator and left to flash off for 5-10 mins.
- Tooling
Soapy solution before skin formation.
- Repair with
SabreSeal MS Facade
Downloads
FAQs
Is SabreSeal MS Façade paintable?
SabreSeal MS Facade Sealant can be painted with most water-based paints. it should be noted that a wide variety of brands and chemical composition of water-based paints systems are available. It is therefore recommended that technical advice be obtained from the paint manufacturer and/or a limited-on site trial be undertaken prior to full application.
Do surfaces need to be primed before applying SabreSeal MS Façade?
SabreSeal MS Façade has excellent primerless adhesion to most common building materials. Critical applications such as multi-story buildings or exposed areas should be primed for optimal adhesion and durability. If you are unsure, conduct prior compatibility tests prior to full application, or contact Sabre technical support department for assistance.
Find the quality product you need
Product Finder
